Rear wiper fault

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Delanor

New Member
Posts
6
Anyone have any idea please - all of a sudden the rear wiper has started to reduce the area that it wipes ie. the arc is getting less, it started when the park position had moved from being on the lower window seal so the wiper was sitting on the glass instead of on the seal when it was parked.

I took the wiper arm off and re - fitted it so the blade is sitting where it normally sits on the glass seal but now when you switch the wiper on the arc it sweeps is less at the top of its arc it used to go quite a way past the perpendicular but now it stops short.

*
*
Del.
 
Anyone have any idea please - all of a sudden the rear wiper has started to reduce the area that it wipes ie. the arc is getting less, it started when the park position had moved from being on the lower window seal so the wiper was sitting on the glass instead of on the seal when it was parked.

I took the wiper arm off and re - fitted it so the blade is sitting where it normally sits on the glass seal but now when you switch the wiper on the arc it sweeps is less at the top of its arc it used to go quite a way past the perpendicular but now it stops short.

*
*
Del.

The wiper is supposed to sit on the seal when the arm is parked. That's the proper position for it.
 
The wiper had moved from its park position on the rubber seal so it was sitting on the glass so I undid the arm retaining nut and rotated the arm so it was parking on the rubber seal but now the arc at the top of the wipe area is less ie, it doesn`t go as far as it used to.

*
*
Del.
 
Back
Top