Rear hub 1985 110

NiallRussell · Mar 25, 2015

Changing bearings and seals on the 110.

Only had one seal (inner) fitted when I took everything off. While I take a break from trying to remove it which seems almost impossible, should I fit the two from the kit, or does the 1985 salisbury axle only have one?

tacr2man · Mar 25, 2015

The 1985 rear salisbury hub would be an oil bath hub so did not have the extra seal as later fitted to the grease type hub , and so the bearings should just about last forever , mine are still original on the 110

NiallRussell · Mar 25, 2015

hmm... good to know.

I changed the bearings / seals as i had a leak of oil (I hope not break fluid) running down the hub and to the inside of the wheel.

hopefully I've done more good than harm swapping them out. not great at messy jobs, I get impatient.

trax · Mar 25, 2015

NiallRussell said:
hmm... good to know.

I changed the bearings / seals as i had a leak of oil (I hope not break fluid) running down the hub and to the inside of the wheel.

hopefully I've done more good than harm swapping them out. not great at messy jobs, I get impatient.

sure it isn't just the hub seal or worn end cap?

NiallRussell · Mar 25, 2015

both have been replaced. fingers crossed thats it.

Rear hub 1985 110

NiallRussell

Well-Known Member

tacr2man

Well-Known Member

NiallRussell

Well-Known Member

trax

.

NiallRussell

Well-Known Member

Similar threads