P38A Rear bumper torx bolts

HI, hoping someone out there can help. I've got a 2002 P38 Westminster 2.5D. The rear bumper has 2 bolts securing the bumper to chassis (see screenshot). On my car, these torx bolts were completely rusted and fell to bits and so the bumper is drooping. Am therefore looking for replacements.

Can anyone advise where I can get these bolts and what size they are? I can find front bumper bolts to buy online but not rear ones.

Thery're reverse torx M10 X 30MM if memory serves.

The front bumper bolts are the same IIRC

ANR4462

Henry_b said:

Thery're reverse torx M10 X 30MM if memory serves.

The front bumper bolts are the same IIRC

Click to expand...

And reverse torx is what, exactly?

myfirstl322 said:

And reverse torx is what, exactly?

Click to expand...

https://www.amazon.com/reverse-torx-socket-set/s?k=reverse+torx+socket+set

Or "female torx" or inverted torx..

myfirstl322 said:

And reverse torx is what, exactly?

Click to expand...

Means you stick it in

J

marjon said:

Means you stick it in

J

Click to expand...

Female is the talks 'torx'....Shirley?

myfirstl322 said:

Female is the talks 'torx'....Shirley?

Click to expand...

Nah not according to the people that make 'em.

Henry_b said:

Nah not according to the people that make 'em.

Click to expand...

So you are in conference wif Venusians?

Pic ^^^ looks torx.
Reverse torx is ‘E-drive’ they call them. Stupid name
Had trouble getting set as there’s few on P38. Only one old guy in shop knew what I was on about.

Try rimmer brothers

pete12345 said:

Try rimmer brothers

Click to expand...

If you can get a mortgage, I think my back bumper bolts were 12mm bihex they may have been changed in the past.

I just used Allen head bolts I had in stock.

Hmmm.... I'm sure mine were M10 Torx 14 heads. I had to go and buy the socket from Hadfrauds.

DanClarke said:

Hmmm.... I'm sure mine were M10 Torx 14 heads. I had to go and buy the socket from Hadfrauds.

Click to expand...

mine were that rusty that an old socket was hammered on until it got a grip and loosened the bolt. proper use of a Manchester micrometer.

Thanks for all your replies. Much appreciated.

These?
Lrcat

Very handy link!
Thanks for sharing.
Mike.

marjon said:

Means you stick it in

J

Click to expand...

Said the actress to the bishop

Rubberknees said:

Said the actress to the bishop

Click to expand...

...or more realistically the Bishop to the altar boy.