Re: Tirfor T532

On Wed, 09 Feb 2005 19:46:10 +0000, PM <[email protected]> wrote:

>In article <[email protected]>, Rich
><[email protected]> wrote:
>
>> Yes got them thanks for that, do you have any pics of the handle?
>>
>> Rich
>No, but from what I remember it's a piece of tube about 3 feet long -
>nothing special. The shear pins will prevent overloading.
>
>Paul

The handles for most Tirfors are telescopic!

I still have a TU16 handle which I could measure for you if you wish,
but I couldn't be sure the handle for yours would be the same!

HTH

Neil

Thanks Neil for the reply if you could do that and possibly a pic.

Rich

On Sun, 13 Feb 2005 17:01:44 GMT, "Rich"
<[email protected]> wrote:

>On Wed, 09 Feb 2005 19:46:10 +0000, PM <[email protected]> wrote:
>
>>In article <[email protected]>, Rich
>><[email protected]> wrote:
>>
>>> Yes got them thanks for that, do you have any pics of the handle?
>>>
>>> Rich
>>No, but from what I remember it's a piece of tube about 3 feet long -
>>nothing special. The shear pins will prevent overloading.
>>
>>Paul
>
>The handles for most Tirfors are telescopic!
>
>I still have a TU16 handle which I could measure for you if you wish,
>but I couldn't be sure the handle for yours would be the same!
>
>HTH
>
>Neil
>
>Thanks Neil for the reply if you could do that and possibly a pic.
>
>Rich
>
Rich,

Might even be able to do better than that, I just found the specs and
dimensions for all the old models T508, 516, 532, and TU8, 16, 32, and
the Jockey. So I'll put something together in the next few days for
you.

Neil