L
Liam
Guest
"Mr.Nice." <mr.nice@-nospam-clara.co.uk> wrote in message
news:jhguj0t9195oal7rlvav7rc8gq46c7kf2d@4ax.com...
> I was adjusting the drum brakes on my 110 today...
> all went well on the rear left, I took the drum off to see how the
> cams work, then put the drum back on and adjusted, no problem.
>
> then went to the right side and couldn't get the drum off, I tried
> tapping, hitting and levering, wouldn't budge, and the little threaded
> hole thing has has the threads stripped.
> no problem I thought, I expect the shoe's have the same material on as
> the other side I'll just adjust the pair of cams the same... however
> one of the nuts that turns the cam is missing...
>
> question is, can I get the little cam assemblies and all as a
> replacement part? or am I scrounging for parts to do this?
>
> any ideas for getting the damn drum off? other than hitting it some
> more...
>
>
> Regards.
> Mark.(AKA, Mr.Nice.)
I'm sure you can get the cams assemblies. I replaced all of them on mine a
couple of years ago as they were seized up. I think I got them from
Paddocks.
Regards
Liam
