A
Andy Spark
Guest
According to useful information found on this news group, I was able to
diagnose the ABS fault with my 1991 RR classic 3.9. The flashing pattern
of lights revealed that it was something to do with the stop light
switch. I've replaced the switch, the brake pedal spring and checked the
wiring: It's all OK, yet when the ABS warning light is still on and the
diagnostic still shows the same fault.
When I bought the new parts the guy at the garage said that I might fine
it difficult to reset the ABS unit, which seems to be the case: -Can
anyone advise me how this can be done? Or alternatively what else might
be wqrong with it?
diagnose the ABS fault with my 1991 RR classic 3.9. The flashing pattern
of lights revealed that it was something to do with the stop light
switch. I've replaced the switch, the brake pedal spring and checked the
wiring: It's all OK, yet when the ABS warning light is still on and the
diagnostic still shows the same fault.
When I bought the new parts the guy at the garage said that I might fine
it difficult to reset the ABS unit, which seems to be the case: -Can
anyone advise me how this can be done? Or alternatively what else might
be wqrong with it?
