Puma 2.2 viscous fan removal

Hello everyone,

I want to change the serpentine belt on my 2.2 Puma. I have been looking, but as yet cannot find the tool to lock the pulley with. I have looked on eBay but they are either 32mm (not 36mm) or don’t have the pins to lock into the holes on the pulley.

Does anyone know where I may be able to find one?

Thank you in advance

Are you just changing the belt? in which case you don't need any special tools, just a 3/8 inch square short extension and a Tommy bar to release the tension on the tensioner pulley. 2 minute job.
Edit; you may need to slacken the bolt on the tensioner - don't fully remove it - to get a bit of wiggle room to get the belt onto it.