ping Richard Beamends

Hi Richard.
Could you confirm you have received my emails recently
over middle door seals and parts inquiry.

Regards John
Mannchester

In message <BFF72D48.2FD%[email protected]>
JOHN N OAKES <[email protected]> wrote:

> Hi Richard.
> Could you confirm you have received my emails recently
> over middle door seals and parts inquiry.
>
> Regards John
> Mannchester
>

Got one yesterday evening if that's the one(s)?

Reply on it's way.

Had rather a lot of spam lately....... apparently I've won several
million quid on several lotteries, more than once on many it seems.
I've also been guaranteed about 300 million quid from dormant bank
accounts in assorted African countries (daily) and the bank acounts I don't
have with all the majors need verifying on an hourly basis. Oh, and
an awful lot of US based companies want 20-off 200Tdi turbos belivered
to Lagos via UPS.

I fear I might have got a tad carried away with the deleting......

Hopefully the new "rules" in AntiSpam set up yesterday will sort
most of these out without too many false negatives.

I fear one of our customers, or a news group subscriber, has on open
relay on their PC.

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Boycott the Yorkshire Dales - No Play, No Pay

On or around Sat, 21 Jan 2006 08:39:42 +0000 (UTC), beamendsltd
<[email protected]> enlightened us thusly:


aha. a "Ping Richard" fred.

Do you know offhand how much of the heater venting stuff built into the SIII
dash is available?

Mine's variously rusted up and fecked. The control cable for the flaps that
direct the heat up and down is siezed and broken and the ducting etc. in the
dash appeares to be non-existent through rust in places. One day, I'd like
to pull it apart and sort it.

I did achieve considerably more output from the heater by removing the
matrix and flushing it, then putting it back with new bits of foam around it
so that the air goes through it rather then round the outside and out of the
various extra holes that allow the matrix to be put in 4 different ways...
--
Austin Shackles. www.ddol-las.net my opinions are just that
In Touch: Get in touch with yourself by touching yourself.
If somebody is watching, stop touching yourself.
from the Little Book of Complete B***ocks by Alistair Beaton.

In message <[email protected]>
Austin Shackles <[email protected]> wrote:

> On or around Sat, 21 Jan 2006 08:39:42 +0000 (UTC), beamendsltd
> <[email protected]> enlightened us thusly:
>
>
> aha. a "Ping Richard" fred.
>
> Do you know offhand how much of the heater venting stuff built into the SIII
> dash is available?
>
> Mine's variously rusted up and fecked. The control cable for the flaps that
> direct the heat up and down is siezed and broken and the ducting etc. in the
> dash appeares to be non-existent through rust in places. One day, I'd like
> to pull it apart and sort it.
>
> I did achieve considerably more output from the heater by removing the
> matrix and flushing it, then putting it back with new bits of foam around it
> so that the air goes through it rather then round the outside and out of the
> various extra holes that allow the matrix to be put in 4 different ways...

Just adding to :

SeriesIII->Heater on the site

Should be there in about an hour.

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Boycott the Yorkshire Dales - No Play, No Pay

On or around Sat, 21 Jan 2006 11:38:34 +0000 (UTC), beamendsltd
<[email protected]> enlightened us thusly:

>Just adding to :
>
>SeriesIII->Heater on the site
>
>Should be there in about an hour.
>

now that's what I call service!

--
Austin Shackles. www.ddol-las.net my opinions are just that
Satisfying: Satisfy your inner child by eating ten tubes of Smarties
from the Little Book of Complete B***ocks by Alistair Beaton.