P38 inicator bulb fail

It keeps telling me when indicating left that the bulb has failed at the
front. Sometimes it works ok, I'm hoping just a loose wire, anyone know of
any weak spots before i get out me meter?

Ta

Nige

"Nige" <[email protected]> wrote in message
news:[email protected]...
> It keeps telling me when indicating left that the bulb has failed at the
> front. Sometimes it works ok, I'm hoping just a loose wire, anyone know of
> any weak spots before i get out me meter?
>
> Ta
>
> Nige

Try putting the bulb in the other side see if it swaps sides.. could be the
filament on the bulb on it's way out.

Lee D

>>>>> "Nige" == Nige <[email protected]> writes:

Nige> It keeps telling me when indicating left that the bulb has
Nige> failed at the front. Sometimes it works ok, I'm hoping just
Nige> a loose wire, anyone know of any weak spots before i get out
Nige> me meter?

Most likely a dirty connector, try giving them a clean.



--
Andy Cunningham -- www.cunningham.me.uk