P38 auto gearbox fault code 21

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Radar1946

Active Member
Posts
362
Location
Lichfield, Staffordshire
Hi all, after start up I go about half a mile and the engine dies and I get a message gearbox fault, the fault code reader says code 21, which says engine speed signal out of range. Any ideas?.l This all started after i ran out of fuel , so i am wondering if it could be anything to do with that.
 
Gearbox fault comes up if you coast in gear with a dead engine. If the engine is stopped you won't get an engine speed signal will you. Is this a diesel?
 
Yes 2.5 diesel, I have a feeling it is nothing to do with the gearbox as you say the message only comes up when the engine stops. I shall try a new fuel filter tomorrow, as this only started after i ran out off fuel
 
Yes 2.5 diesel, I have a feeling it is nothing to do with the gearbox as you say the message only comes up when the engine stops. I shall try a new fuel filter tomorrow, as this only started after i ran out off fuel

It isn't. Check the lift pump for function and change the filter. Then get back if it continues. Any air in the clear pipe after it stalls?
 
Changed the filter, checked the lift pump, found air bubbles in the clear plastic pipe, the gauge read just under quarter full, I managed to get to the fuel station which is just by where I live.
I put in forty pounds worth off fuel and it has been ok ever since. The gauge must be faulty so I dont let it go under half full now. Thank you all.
 
Back
Top