P38 Air Suspension

I'm messing about with my long term defective EAS system on my '96 HSE by
reworking the ECU. However although the RAVE books tell me what distances
above and below normal all the settings are they don't tell me what value 'normal'
actually is.

Does anybody have a tape measure reading from hub to the bodywork above I
can use to tell my new system 'this is normal' please? Distance above bump
stop height would be even better. I'm guessing there is something in the
testbook stuff but that won't help now the ECU now runs NigSoft code.

nigelH

On Mon, 25 Sep 2006 08:11:29 +0100, "Nigel Hewitt"
<[email protected]> wrote:

>I'm messing about with my long term defective EAS system on my '96 HSE by
>reworking the ECU. However although the RAVE books tell me what distances
>above and below normal all the settings are they don't tell me what value 'normal'
>actually is.
>
>Does anybody have a tape measure reading from hub to the bodywork above I
>can use to tell my new system 'this is normal' please? Distance above bump
>stop height would be even better. I'm guessing there is something in the
>testbook stuff but that won't help now the ECU now runs NigSoft code.
>
>nigelH
>
Just delivered mine to have the LPG kit fitted so unavaulable for
measurement. Will get it back at the end of the week so can get tape
measure out then if you still need data.

Will Nigsoft ECU become another Combro product?

David

rads wrote:
> Will get it back at the end of the week so can get tape
> measure out then if you still need data.

Many thanks

> Will Nigsoft ECU become another Combro product?

LOL. No. But I'll write it up and stuff it on some discrete corner of the www.

nigelH