D
Derry Argue
Guest
Spraying the hinges and door lock in readiness for fitting to
new rear door to my D90.
One thing I've noticed is there appear to be no drain holes in
the box sectional frame to the door. I very much doubt the
painters managed to get paint inside the section, so it must be
bare metal. Rust just waiting to happen?
Is there any reason why I should not drill a couple of holes at
each bottom corner and waxoyl? Or, possibly better still, run
some POR15 into a hole and slowly rock it from side to side? Or
any other suggestions?
Derry
new rear door to my D90.
One thing I've noticed is there appear to be no drain holes in
the box sectional frame to the door. I very much doubt the
painters managed to get paint inside the section, so it must be
bare metal. Rust just waiting to happen?
Is there any reason why I should not drill a couple of holes at
each bottom corner and waxoyl? Or, possibly better still, run
some POR15 into a hole and slowly rock it from side to side? Or
any other suggestions?
Derry
