Series 3 Mounting brake failure switch

Where does the series 3 brake failure switch mount?

RHD? Under the brake pedal, bolted to a bracket on the chassis, beside the steering box upright.

Wildefalcon said:

RHD? Under the brake pedal, bolted to a bracket on the chassis, beside the steering box upright.

Click to expand...

Affirmative, RHD. Thanks for that. I’ve got a new chassis and fitted the original (re-furbished)
upright. Was worried I’d welded in a patch on the upright and missed the bracket. Just to confirm, outboard on the chassis below the brake pedal is where the switch should be fitted.
Thanks very much.
Angus

Inboard.

If you have a look at my six pot rebuild thread you will see where it is mounted and which way up. I had to make the bracket as I had chucked it when disposing of the chassis. This is the way and position it was mounted on the vehicle originally

Either way around