Hi again.Next fault with my cheap p38 !! The message centre has been telling me to select neutral since i first had the vehicle and tried sellecting low, it never went into low. Have put power to the transfer motor and that works ok. Using a power probe i thought i would check all the pins coming from the ecu for life and have now fried the ecu ( should have known better) I have read elsewhere on here that the manual ecu's are interchangeable, Does anyone know what part numbers fit ? Also it is constantly teling me that fuses 10, 13 and 20 are blown. My p38 doesnt have a place for these fuses. Any ideas ? Thanks again
Luke
Luke
