Lt77 Gearbox Reverse Probs...help !!!

bugbog101 · Dec 5, 2007

Hiya all....

Re posted re no replies on last post !!!!!

Just wondering if any of you have the same problem as me or can give any advice on repair.

I have a disco 1 2.5 TDi 1992 on a K reg, with the LT77 gearbox. Yesterday, without any warning I was unable to engage reverse gear. I've had no problems in the past with this. I can still select all my other gears, including low range & my diff lock without any problems.....but still can't get F ing reverse !!!

Any idea's chaps ????

bustersbus · Dec 5, 2007

is it when ye first start up? If so, release handbrake and try again

woot · Dec 6, 2007

mines a bit tricky to get in reverse sometimes too. Sticking it in transfer neutral and running in 2nd gear briefly, then trying reverse again sometimes helps (this also helps if it won't go from H to L or L to H. A bit of a pain mind.

octanemad · Dec 6, 2007

You may find that the roll pin on the reverse selector has broken.

Its an easy fix in about ten mins.

OM

GRUNT · Dec 6, 2007

Dunno if the Discos Lt77 is the same as the 90s' but have you had a look at the plunger on the gear lever housing.

bugbog101 · Dec 7, 2007

Buster bus, Woot, Grunt & Octanemad.....

Many thanks for all your help & advice. Will try out all your suggestions over the weekend.....I'll keep you posted on how I get on.....or not.

Once again many thanks.

Lt77 Gearbox Reverse Probs...help !!!

bugbog101

Member

bustersbus

Well-Known Member

woot

New Member

octanemad

New Member

GRUNT

Well-Known Member

bugbog101

Member

Similar threads