sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
I think he means the steering box thrust bearing ( brothers went on his ) , it was a bastard to do , ended up changing the whole lot box and column for a 2nd hand one .....
Land Rover Virgin!
- Thread starter omlaysause
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
sypher
Well-Known Member
- Posts
- 1,997
- Location
- Forest of dean
No 24
Last edited:
Davec
New Member
- Posts
- 2,131
If it is the one at the top of the steering column then. as has already been said. it's a roght bastard of a job. Long nose pliers, screw driver etc and rip it to bits. I have heard of people pushing it further down the column (you still have to smash it a bit) but obviously there is a limit to how often you can do that!
But, I would expect that to allow the wheel to actually wobble around, rather than give play in the turn of the wheel.
But, I would expect that to allow the wheel to actually wobble around, rather than give play in the turn of the wheel.
omlaysause
New Member
- Posts
- 41
No 24
It's no. 17. Managed to get it out quite easily so obviously not the one you guys thought it was .... thank god. New one on its way.
