keycode lockout

hi all, am unable to open my car !, i have waited for the keycode lockout alarm to go out on dash,entered the correct eka code ..... still nothing !,the indicators do not flash when entering the code ?,please help me .

Did you check your battery? That thing where you turn the key in the door to get the fob working sometimes help.

You should still be able to open the door. The keycode lockout is only for the immobiliser. Or did you mean you could get in but couldn't start it?

cannot get into the car,its been stood for a few months had a brand new battery on it and it went flat,managed to get bonnet open to charge battery ,now wont open with remote or key ?

How are you entering the lock code, don't forget you have to turn the key to the lock position and back to center 4 times before entering the code

hello,
yes the button should move.
it looks like the linkage from the keylock is disengaged. some helpful information:
rrepairs
regards, korkut

kork said:

hello,
yes the button should move.
it looks like the linkage from the keylock is disengaged. some helpful information:
rrepairs
regards, korkut

Click to expand...

Absolutely, looks like you've found the answer, good luck.
John

see where ur coming from ,but.... when i pulled button up the door opened ,if it was dissconected it wouldnt open surly ?

stew.g said:

see where ur coming from ,but.... when i pulled button up the door opened ,if it was dissconected it wouldnt open surly ?

Click to expand...

Looks like the mechanism is not connected to lock barrel

there are two rods connected to the latch. one from button, one from key barrel.
you have to open the door card and undo the handle, you will find out, what the problem is. small clip missing, which holds the linkage to lock barrel plate.
you may access the rod only by taking the handle off (losening a bit), but carefully, the mentioned plate is cast metal and breaks easily.
you can reconnect the linkage by using a simple hairclip, if you cannot find the original one.
regards, korkut