Indie Quote

Hi Folks,
What would you expect to pay for the below work at a indie?
Replace both front pinion seals,Rear drive shaft seal and thermostat housing gasket
Its a 3.5 V8 90

cheers...

Anyone??

2 maybe 3 hours labour, none of its bad work, just messy!
By driveshaft seal I assume you mean the one in the stub axle?

Thanks so 400 is a bit pricey?

I'd drive to your house and do it for you for that

Assuming we are talking the same parts, 400 quid is really taking the ****
With air/electric impact tools pinions seals 20 minutes each, stat gasket if all 3 bolts come undone again 20 minutes incl fag break
Drive shaft seal again if we are talking the one in the stub axle not much more than an hour maybe a bit longer if bolts wont come undone, if drums may need to remove brake pipe and bleed up that wheel only afterwards, so lets be generous and say 2 hours.
Thats an awful long way from 400 quid
I would speak to them and confirm you are talking about the same parts etc

thanks all seems very pricey then , will ring around for more quotes