Indicators Working Part Time..!!

My Series 3 indicators work but do not flash until the engine is revved or after 10 minutes or so of driving. No problems starting the car and all the other electrics work OK. Hopefully just a simple replacement but I'm not sure what...!!!!

Any help much appreciated.

could be a sticky relay - I'd try changing that first.

thanks will try.....everything else is original so that could be it

jalmassi said:

My Series 3 indicators work but do not flash until the engine is revved or after 10 minutes or so of driving. No problems starting the car and all the other electrics work OK. Hopefully just a simple replacement but I'm not sure what...!!!!

Any help much appreciated.

Click to expand...

when the engine is revved the voltage goes up a bit, when run for ten mins the voltage will be higher then when just started, as the battery has lost a bit of umph. so suspect extra resistance somewhere in the circuit, bulb holders earths etc. clean it all and it will go away.
mine did that and it was a corroded bullet connector.

Yup that was it...sticky relay. Thanks for the help.