Ignition switch

Hi all Would anybody have a spare connector which sits in the white plastic cup of the ignition switch and the end of ignition barrel slots into the other end. So the ignition switch can be operated by the key. Cheers

you need a little patience my freind

first find a piece of steel or aluminium rod about 5mm diametre then file a flat surface into one side till it fits the hole in the switch then cut 12mm off the end and fit the switch to the barrel as normal

that is all that it is at the cost of nothing but a little time and patience

and a little word of advice before you get roosted for this being yer first post please say hello in the introduce yourself section

:welcome::welcome:

Hi Thanks for the advice