Ignition Barrel Illumination
- Thread starter DuncanS
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
The bulb is fitted to the immobiliser transponder coil housing which is located on the ignition switch lock barrel, to access it you will need to remove the upper and lower shrouds.
From memory, it's a minature capless clear bulb (On my 2002, TD4)
From memory, it's a minature capless clear bulb (On my 2002, TD4)
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
Sounds like a w5w then.
Like the side lights.
Isn't it green like the rest of the switchgear?
Like the side lights.
Isn't it green like the rest of the switchgear?
baptista
Active Member
- Posts
- 678
- Location
- Lisbon, Portugal
on early VINs it's part#14 on diagram,
Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER
Allbrit.de - Ersatzteile für LAND ROVER & MG ROVER
Epicuser
Ex Freelander Owner
- Posts
- 2,393
- Location
- North East Surrey
Okay. That was just a guess.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
:behindsofa:
When I had mine apart to replace the wiper switch last year, although it was working o.k. , I decided to change the bulb as a matter of course. It was a clear bulb that came out and I replaced it with the same.
It's smaller than the standard W5W capless and is around 1 watt or so...yes, it is the same size as those bulbs fitted in the switches.
:smokin:
teddywood1
Well-Known Member
- Posts
- 5,559
- Location
- stoke-on-trent
if you are fitting a led you need a resistor on the anode side or you will just blow it the anode wire is the longer of the 2 . hope this helps
