Help

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

Eddy1989

New Member
Posts
7
Location
Nottm
I have a freelander td4 stupidly pulled the engine cover off leaving a big whole which spurts out oil! What part neees changing?
 
IMG_2756.JPG Feel so stupid
 
Cover was not attached bar that one. I assumed it was a clip wouldn't imagine for one second a flimsy engine cover would b attached by bolt into an oil chamber smh thanks
 
You may be lucky and get away with a good clean and then try and use resin to glue the old piece back or plastic metal to replace it.

But it could get messy.

Depends what it is holding down in place.

Cheers
 
Back
Top