Hello all, I've been rebuilding my 1996 defender 300tdi 90 and I'm wanting to move the hazard and fog switches to a mud centre console I've bought plus wire in some other switches too.
My problem is the hazard has 7 wires I think going to it including the green and white wire and green red wire from the indicators but the new hazard switch only has 5 spade pins. Any ideas on how to get round this.
Also the old fog switch is a non latch switch which sends a signal to the fog relay but my new switch is a latch switch, would I have problems with the new switch. Any help would be greatly appreciated cheers
My problem is the hazard has 7 wires I think going to it including the green and white wire and green red wire from the indicators but the new hazard switch only has 5 spade pins. Any ideas on how to get round this.
Also the old fog switch is a non latch switch which sends a signal to the fog relay but my new switch is a latch switch, would I have problems with the new switch. Any help would be greatly appreciated cheers
