DannyBacchus
New Member
- Posts
- 1
- Location
- England
Hi there,
I'm new to the forum (freelander owner) and have a question I'm hoping someone can answer regarding the multi-plug that connects to my ABS module.
I am halfway through a shuttle valve bypass procedure to cancel the 3 amigos and have got as far as removing the shuttle valve from the bottom of the module. I am now attempting to connect the wires to the earth cable, but do not have the yellow/green cable on the multi-plug as many of the Disco instructions guides point to. I have a 13 pin multi-plug with 10 wires feeding into it. Could anyone tell me which one of these is the correct cable to use?
Thanks so much in advance!
I'm new to the forum (freelander owner) and have a question I'm hoping someone can answer regarding the multi-plug that connects to my ABS module.
I am halfway through a shuttle valve bypass procedure to cancel the 3 amigos and have got as far as removing the shuttle valve from the bottom of the module. I am now attempting to connect the wires to the earth cable, but do not have the yellow/green cable on the multi-plug as many of the Disco instructions guides point to. I have a 13 pin multi-plug with 10 wires feeding into it. Could anyone tell me which one of these is the correct cable to use?
Thanks so much in advance!
Last edited:
