satchmolips
Active Member
- Posts
- 422
- Location
- Worcestershire
Seem to get through my rear drive member flanges (1990 H Reg 110) every two year or about 5k. Are there any heavy duty ones anyone can recommend? (Mine are the less protruding type)
Heavy Duty Drive Member Flanges
- Thread starter satchmolips
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steveo
Well-Known Member
- Posts
- 449
- Location
- north Surrey
If you put HD flanges on, your drive shafts will wear quicker. If you need drive flanges so often your shafts are already worn, or you need to be gentler...... The flanges are a weak spot, because they can be changed in 5 mins if needed
flat
Well-Known Member
- Posts
- 9,075
- Location
- Far away from you!!
Also are you using oem or pattern parts?
Mo Murphy
Active Member
- Posts
- 89
- Location
- Letchworth Garden City
On a Rover axle I prefer one piece half shafts from a Discovery.
Mo
Mo
tottot
Well-Known Member
- Posts
- 7,511
- Location
- west wales coast
And grease the splines.
satchmolips
Active Member
- Posts
- 422
- Location
- Worcestershire
Replaced both half shafts and new heavy duty driving members. 10 minutes a side. Nice easy job
steveo
Well-Known Member
- Posts
- 449
- Location
- north Surrey
and cheap too - we had a Toyota Landcruiser in work the other day with failed drive members - That would be £1000 sir..... flanges and shafts
Similar threads
