bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
can anyone tell me how to get the heater matrix out of my 1991 defender.
many thanks in advance. LEE
many thanks in advance. LEE
heater matrix
- Thread starter bevhelee
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
bevhelee
Well-Known Member
- Posts
- 1,151
- Location
- Bridgetown WA
done it turned out to be a bit of brute force and lack of knowledge
dirty hands
New Member
- Posts
- 371
- Location
- North Yorkshire
Eye, its usually brute force.
discomania
Well-Known Member
- Posts
- 6,947
Some bolts down in the N/S footwell disconnect the electrical connector and undo the control cables.
Undo the too bolts from the bulkhead and start to rock it a bit, you might need to do some prying to get the wing pipe to undo. New foam seals will be required.
Undo the too bolts from the bulkhead and start to rock it a bit, you might need to do some prying to get the wing pipe to undo. New foam seals will be required.
