gearbox

how much of a job is it to change gearbox on a 300tdi discovery? mines vibrating and knocking like mad. Got loads of plat in it to.

dunno,sirus allegedly took his enjun and box outta his 200 tdi today

heres a couple of links showing whats involved in doing a LT77 which will give you some idea

Replacing an LT77 in a Discovery inc LT230/Clutch - LR4x4 - The Land Rover Forum
Replacing an LT77 in a Discovery inc LT230/Clutch - LR4x4 - The Land Rover Forum

Hi,

Currently in the middle of replacing the box on mine mate its a case of if you got the right tools and a garage/workshop to do it in its fine if not a bloody nightmare the box and transfer box weigh a tonne im putting the box in first then fitting the transfer box on after its more fiddly to connect up but the gearbox on her own isnt to bad.

Dave

HI i have just done mine, 200tdi I changed the both together as one unit it is a lot more easy, but I did mine out side my garage, you have to lift the car high enough to clear the floor pan, I used ramps and a pair of steel wheel holders (ramps without the angle) and lowered the two, on a 2 ton trolley jack with a small cradle to support them, with a ratchet strap to stop it moving, my jack has a removable centre, so I bolted through the cradle.