Gasket seal

Right then, bell housing apart and tonight I'll put in the new clutch fork (hope this is the easy bit ...) and push the gearbox back into place, do I need to use gasket sealant between the bell housing and how about exhaust where it connects to the engine ( I still have the original metal gasket) ?. The car is a 98 Disco 300 Diesel.

Cheers
Al

No sealant needed between engine and gearbox.

You may well get away with reusing your metal exhaust gasket, but they are not expensive to replace. A thin smear of exhaust assembly paste is not a bad idea, but you need far less than you might think.

Cheers, thanks for that !