well after replacing the compressor i then removed the front valve block because the landy would lower after a few days
took the valve block apart that controls the front suspension , is full of white silica dust and also the spring is missing from the middle valve
all the rubber seals that are on the end of the valves are pitted
alas just going to order a new one
this must be why is was slow to raise then after a few days would drop
shame u can't get the little bottom rubber seals, have got the o rings
well fingers crossed once this is done the entire suspension should be done and dusted
the spring is missing from the middle valve which is the input from the compressor , don't understand how it worked , must have been worked on before and maybe the spring was lost , then just put back together
is the original though
took the valve block apart that controls the front suspension , is full of white silica dust and also the spring is missing from the middle valve
all the rubber seals that are on the end of the valves are pitted
alas just going to order a new one
this must be why is was slow to raise then after a few days would drop
shame u can't get the little bottom rubber seals, have got the o rings
well fingers crossed once this is done the entire suspension should be done and dusted
the spring is missing from the middle valve which is the input from the compressor , don't understand how it worked , must have been worked on before and maybe the spring was lost , then just put back together
is the original though