clank69
New Member
- Posts
- 1
- Location
- nuneaton / spain
Hi guys , first time post so bear with me , I have a 1.8l 2003 freelander with a very low ( always biting ) clutch , already changed the slave and master and the bracket , same problem , had a read up on here so checked and lubed the shaft . I can leaver the arm away from the bell housing quite easily but it springs back towards the housing on its own , am I right in thinking it should normally come to rest away from the bell housing and towards the slave cylinder . gears are difficult to engage ,reverse almost imposs . any help and advise would be cool , TIA
