yozzer1982
New Member
- Posts
- 5
does any one know how i would fit the 200tdi rad and intercooler to the 2.5td engine
if anyone could help it would be apreciated
cheers
if anyone could help it would be apreciated
cheers
fitting a 200tdi rad and intercooler onto a 2.5td defender90
- Thread starter yozzer1982
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
discomania
Well-Known Member
- Posts
- 6,947
Take the old one out, modify the mounts a little and then rejig pipework to suit, I think you will also need to weld some pins to the top to let you use the old mounts.
Are just fitting the rad and intercooler to your 2.5TD engine?
Are just fitting the rad and intercooler to your 2.5TD engine?
hughesy
Well-Known Member
- Posts
- 4,200
- Location
- Isle of Anglesey
Get searchin this has been covered a million times it's all out there you just got to look for it.
boydy1989
Well-Known Member
- Posts
- 3,063
- Location
- Northants/Oxfordshire/Warwickshire
my 300tdi thread shows the mods i did to mine also, but thats a 300.
