Fip

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
JohnnyCrash

JohnnyCrash

New Member
Posts
1,917
So just a quick question as I can’t see any FIP removal instruction in RAVE but as the shaft is located in the timing gear with a woodruff and the pump body is held in with 2 bolts – can I remove the pump without disturbing the timing gear?

FIPDiagram.jpg


So the pump can be worked on away from the car – or even replaced with a pump from a donor P38?
 
JohnnyCrash said:
So just a quick question as I can’t see any FIP removal instruction in RAVE but as the shaft is located in the timing gear with a woodruff and the pump body is held in with 2 bolts – can I remove the pump without disturbing the timing gear?

FIPDiagram.jpg


So the pump can be worked on away from the car – or even replaced with a pump from a donor P38?
Click to expand...

There is a removal procedure in the fuel system diesel section. Was looking at it the other day
 
No definately not, you must fit special tool to hold sprocket in place. Or tensioners will pull sprocket out of position.
 
Be careful, just looked at Egay and none of the tools i have found up to now seem correct. You need LRT-12-119. Google it or look at RAVE. None of the ones i have seen on Egay so far look like mine. The threads for screwing onto the sprocket should be on the inside of the tool not the outside.
 
You must log in or register to reply here.

Similar threads

T
Classic VM Injection pump removal
Replies
5
Views
720
norseman
norseman
Bix
P38A Slow to rev, down on power
2
Replies
25
Views
2K
Bix
Bix
Seaswood
2.5 na smoking
Replies
14
Views
1K
Seaswood
Seaswood
F
P38 DSE loss of power when driving
2
Replies
38
Views
4K
Datatek
Datatek
JT_spark
P38 DSE Auto intermittent lack of power after vehicle has been hot
Replies
8
Views
1K
brianp38dse
brianp38dse
Back
Top