EFI Conversion

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
Have you acquired a fully working & complete EFi system? What would you convert to? Flapper, Hotwire or go big on Megasquirt?

Do you think the benefits would outweigh the cost of buying the injection system and spending the time converting to EFi?

I'd gladly lend a hand spannering on another V8 if I was closer. :) Its just a case of swapping inlet manifolds + fuel pumps, torquing the bolts up correctly and wiring in ~4 wires. (Permanent 12V, switched ignition 12V, gnd, fuel pump feed and feed from the coil).

EDIT: Hmmm... only 135 miles away...
 
My other option is to bin the strombergs and fit a Edelbrock four barrel, which i have been led to believe has a electric fuel pump and no choke, so is far more wife friendly, which is again why i am doing this..
My wife will not drive the Defender due to the choke and fun from cold, hence its either get this fixed or i will have to sell :(
 
Carb upgrade is less work. No wiring, no new fuel lines or high pressure pump assuming yours are serviceable. Then there's the risk of buying efi with an existing issue and having to fault find.
 
cooltide said:
Carb upgrade is less work. No wiring, no new fuel lines or high pressure pump assuming yours are serviceable. Then there's the risk of buying efi with an existing issue and having to fault find.
Click to expand...

This is definitely something to consider! If you're like me, anything for an easy life! :D
 
You must log in or register to reply here.

Similar threads

I
3.9 efi temp sender to a 200tdi temp gauge
Replies
2
Views
244
iwallace
I
Loafer61
Serpentine Belt made a bid for freedom…
Replies
8
Views
883
Loafer61
Loafer61
R
V8 conversion
Replies
4
Views
441
Ryan thomas
R
R
Kwik Fit say no-no to MoTs on classic?
2
Replies
36
Views
3K
Datatek
Datatek
L
L322 AIR SUSPENSION faults PART 90000
2
Replies
20
Views
1K
marjon
marjon
Back
Top