On 2006-06-13, Austin Shackles <
[email protected]> wrote:
> three down, three to go?
One down, five to go, I've only fixed one so far, I was advised to run
it for a while on the second as they sometimes go away, but it's not
gone and now a third has cropped up. They don't leak much but there's
less than half a litre in the portal reduction hub so it's worth
fixing. They don't leak normally, it's a well-designed setup, it's
just that mine's been sat still for so long.
Work involved is relatively minor, just take off wheel and brake
shoes, undo bolts on brake backing plate then knock off the entire
wheel drive unit with large cog on wheel flange, small cog on stub
axle. Pull off large cog (the hardest bit), bash flange out of
bearing, replace seal, replace bearing, put it back together.
--
Blast off and strike the evil Bydo empire!