EAS problem on 95 RR 4.0SE

I have EAS problem for my 95 RR 4.0SE. The extend ride high light stay
on all the time and the high position indication lights (next to high
select switch) all on. High position can not be adjusted now and
warning message shows 35 mph drive only. After refer the P38A
suspension information and I was able to manually adjust the air spring
to standard high. But after let the RR set for over night the high was
draopping for about 1/2". So

1. What is the problem to cause the high adjust malfunction? 2. What is
the reason to cause the high change after I adjust it to the correct
setting?

This problem was happened after the car came back from the off-road
driving. I found mud got into the ECU after I opened the connector. Can
someone give me some information? Thanks.

David Dunn wrote:
> I have EAS problem for my 95 RR 4.0SE. The extend ride high light stay
> on all the time and the high position indication lights (next to high
> select switch) all on. High position can not be adjusted now and
> warning message shows 35 mph drive only. After refer the P38A
> suspension information and I was able to manually adjust the air
> spring to standard high. But after let the RR set for over night the
> high was draopping for about 1/2". So
>
> 1. What is the problem to cause the high adjust malfunction? 2. What
> is the reason to cause the high change after I adjust it to the
> correct setting?
>
> This problem was happened after the car came back from the off-road
> driving. I found mud got into the ECU after I opened the connector.
> Can someone give me some information? Thanks.

It will need connecting to rovacom or testbook type thing & re-setting mate. I suspect you havent done
that? My local LR dealer charge £60 to re-set it.

Nige


--

Subaru WRX
Range Rover 4.6 HSE (The Tank!)
110 Hi Cap (Ben)

'"Opinions are like arseholes, everyones got one"