P38-FYFEY
New Member
- Posts
- 34
- Location
- NORTHAMPTON, ENGLAND
Hi can someone point me towards the EAS exhaust and filter please.
1995 4.6 HSE limited.
Regards
Steve
1995 4.6 HSE limited.
Regards
Steve
EAS exhaust and filter
- Thread starter P38-FYFEY
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
inlet filter,round black plastic unit on compressor head,exhaust filter inboard rear of valve block.both unscrew.
P38-FYFEY
New Member
- Posts
- 34
- Location
- NORTHAMPTON, ENGLAND
Thanks Alan... Although I couldnt find the Exhaust at back of valve block? Gonna nip to specsavers and try again! Thanks for post though mate.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
The inlet filter is, as described on the end of the compressor. It consists of a small foam pad in a plastic housing.
The exhaust filter is on the side of the EAS box, to the rear of the plastic pipes that go to the springs. It's approx. 20mm dia. X 25 mm long and has a foam sleeve, usually red when it's new, on the outside.
The exhaust filter is on the side of the EAS box, to the rear of the plastic pipes that go to the springs. It's approx. 20mm dia. X 25 mm long and has a foam sleeve, usually red when it's new, on the outside.
tomcat59alan
Well-Known Member
- Posts
- 18,611
- Location
- wirral and triquivijate
inboard ie engine side rear,not at the back,regards
Datatek
Well-Known Member
- Posts
- 45,772
- Location
- Near Poitiers SW France
All 3 of my exhaust filters are white with black ends (actually dirty white) otherwise as said by the others.
