Hi Guys,
Thanks again to those of you who "diagnosed" my EAS fault problem and "prescribed" the replacement of the Valve Block Driver, as a possible fix.
Well I purchased a Drive Pack from the US and today attempted to "swap" the units. The problem being that my existing Drive Pack has two additional red wires with a connector. The new Drive Pack does not
!!!
Any ideas on this? The Drive Pack part numbers are the same and both are identical, apart from the new one missing the two red wires and connector! Is my Drive Pack a newer version? Can I install the unit without having the extra two red wires connected to something?
My RR is a 2000 Vogue (P38a of course) VIN - SALLPAMD3YA441090
Any help at all will be appreciated. Cheers, Tonys
Thanks again to those of you who "diagnosed" my EAS fault problem and "prescribed" the replacement of the Valve Block Driver, as a possible fix.
Well I purchased a Drive Pack from the US and today attempted to "swap" the units. The problem being that my existing Drive Pack has two additional red wires with a connector. The new Drive Pack does not
!!!Any ideas on this? The Drive Pack part numbers are the same and both are identical, apart from the new one missing the two red wires and connector! Is my Drive Pack a newer version? Can I install the unit without having the extra two red wires connected to something?
My RR is a 2000 Vogue (P38a of course) VIN - SALLPAMD3YA441090
Any help at all will be appreciated. Cheers, Tonys
