discovery 2 HDC

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
A

Al Clarke

Guest
Hello group I was trying to use the HDC on my yr 2000 V8 Discovery, manual
gear box, and have found it to be non functioning. The on dashboard display
light comes on with the ignition for a couple of seconds and then goes out,
as it should but the HDC wont work as it should. I have the high low lever
in low and am in first gear but it wont work just 3 dings about 1/2 a second
apart when I turn off the switch. any clues or pointers please.

Al Clarke


 
On Tue, 29 Mar 2005 18:34:10 GMT, Al Clarke wrote:

> I have the high low lever in low and am in first gear


And less than 31mph and clutch engaged (not pressed)?

> but it wont work just 3 dings about 1/2 a second apart when I turn
> off the switch.


What do you get when you switch it on? I *think* the three bongs on
switch off is normal.

The bongs actually annoy me, with so many systems all trying to use
using the bongs to signal many different states it's rather confusing.
I'm not a great fan of talking cars but I think a voice box would have
been a great improvement over the bongs (with the option for bongs
only of course...).

TBH it has to be a pretty steep hill for the HDC to actually do
anything when in 1st Low, by steep I mean > 1:5. At least thats what I
have found in my TD5...

--
Cheers [email protected]
Dave. pam is missing e-mail



 
Back
Top