Coils back to SLS but will not work,

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.

npeachey66

New Member
Posts
1
Hi All hope you can help
I replaced the SLS on my Discovery 2 with coils approx. 9 months ago after a number of problems, I have now decided to go back to SLS. I have replaced the knackered Compressor with a tested and full working one and have fitted 2 new airbags.
When I fitted the coils I did not have the SLS deactivated as I fully intended to reinstate it at some point, The SLS warning light has illuminated as expected and remained on all the time whilst the coils have been fitted (occasionally pinging when I go over the local speed humps) anyway after fitting it all back on I went to start it up and the compressor will not start, I have done all the normal things engine running with all the doors closed, partially jacked up the rear to activate the ride sensors (they were fitted new before the old pump ceased) and nothing seems to work all the fuses appear to be ok but the dash board light has remained on and the pump will not start. any ideas please? what am I missing? I am going to try some other things but just throwing this out there in case someone can help.
 
Back
Top