- Posts
- 17,803
- Location
- Benfleet, Essex
We were talking about this on one of the forums the other day.
Helpfully, youtube just served this up to me. It is on thaor engined Disco, but the P38 is essentially the same I think.
Somewhere in the comments a chap with a P38 has made the following helpful observation.....
"99 P38 4.6 COIL PACK REMOVAL:
A) Unscrew 2 screws holding the coil pack bracket onto motor.
B) FLIP THE COIL PACKS UPSIDE DOWN WHILE ATTACHED TO BRACKET.
C) the thing slides out above the left side bank without even touching the firewall foam or any other component.
D) Your'e already done, there is no D.
E) I wonder if anybody else in the world has ever tried the 'flip it' idea which I thought of about 6months ago after spending about 4minutes looking into how i'll remove it."
Helpfully, youtube just served this up to me. It is on thaor engined Disco, but the P38 is essentially the same I think.
Somewhere in the comments a chap with a P38 has made the following helpful observation.....
"99 P38 4.6 COIL PACK REMOVAL:
A) Unscrew 2 screws holding the coil pack bracket onto motor.
B) FLIP THE COIL PACKS UPSIDE DOWN WHILE ATTACHED TO BRACKET.
C) the thing slides out above the left side bank without even touching the firewall foam or any other component.
D) Your'e already done, there is no D.
E) I wonder if anybody else in the world has ever tried the 'flip it' idea which I thought of about 6months ago after spending about 4minutes looking into how i'll remove it."