new to this 4x4 game but 2 weeks in and im loving my 3.9ltr vogue se auto...bit thirstier than my 325i se bimmer but bags more fun...however, the drivers seat has lost all power to the adjustable motors so its goes neither back/forth tilt or otherwise...any easy fix, or where should i look first ? regards to you all ...paul
classic rangie electrical gremlins !!!
- Thread starter diablo666
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
splatthefat
New Member
- Posts
- 31
- Location
- East Norfolk
Hi Paul
My '92 Vogue SE is the same, although the seat controls now operate the mirrors for some reason.
If it helps i managed to movr my seats by touching wires from a battery on the contacts (i'll probably be b*******d for that).
It's either the fuse (at the base of the passenger seat i think) or the ECU at i beleive it's a common fault.
HTH
Chris J
My '92 Vogue SE is the same, although the seat controls now operate the mirrors for some reason.
If it helps i managed to movr my seats by touching wires from a battery on the contacts (i'll probably be b*******d for that).
It's either the fuse (at the base of the passenger seat i think) or the ECU at i beleive it's a common fault.
HTH
Chris J
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
The seat switches tend to get full of cr*p and the contacts get dirty. Take the switches off and give them a good clean with switch cleaner-common fault on Vogue's.
Irishrover
Well-Known Member
- Posts
- 5,317
- Location
- La Trimouille, Vienne, France
The two screws holding the switch base to the seat are a pig to get at-you may need the shortest pozi. you gan get or the cranked type. The top part of the switch clips out of the "Box" but the wires don't have much give on them.
You think it's wet over there-we get it first and more of it!!!!!!!!!
You think it's wet over there-we get it first and more of it!!!!!!!!!
