jiloppy
Active Member
- Posts
- 247
- Location
- Lanarkshire
Hi guys, Does anyone know how to successsfully remove the blade from your key fob without doing any damage so as you can fit a new blade. A have tried alreadys and its a fookin nightmare. cheers
changing blades
- Thread starter jiloppy
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
50 pence
New Member
- Posts
- 1,471
- Location
- Cambridgeshire
To remove mine I gripped the blade with some pliers, the fob in my other hand, and gave it a little pressure until it came out.
Before you do this, just try to wiggle the blade,gently with the pliers, to see if there,s movement between the small plastic shoulder of the blade and the fob housing. ( as later ones were, apparently, glued in ).
Before you do this, just try to wiggle the blade,gently with the pliers, to see if there,s movement between the small plastic shoulder of the blade and the fob housing. ( as later ones were, apparently, glued in ).
jiloppy
Active Member
- Posts
- 247
- Location
- Lanarkshire
Kind of thought mate. I have a 04 disco and the key fob looks as if its been put through a mincer......
