can you identify ....

I

[email protected]

Guest

• Mar 27, 2006

• #1

the axle strap shown below fitted to a modifed skoda rapid. I know it
is a landrover axle strap, but I don't know which model - anyone help
??

http://www.geocities.com/iggypop37/101_0062-1.jpg

cheers

 

S

slob

Well-Known Member

Posts

22,488

Location

Harrogate or London

• Mar 27, 2006

• #2

series111 me thinks!

 

W

[email protected]

Guest

• Mar 27, 2006

• #3

> the axle strap shown below fitted to a modifed skoda rapid. I know it
> is a landrover axle strap, but I don't know which model - anyone help

Does it matter what it came off? It's obviously been chopped at one
end and it looks like it may have had another hole through it as well
at the bottom. I'd be happier if there were two bolts holding it on at
the top, were it on my car. If you're looking to do the same I'd just
buy the cheapest LR strap....

Regards

William MacLeod

 

J

JD

Guest

• Mar 27, 2006

• #4

[email protected] wrote:

> the axle strap shown below fitted to a modifed skoda rapid. I know it
> is a landrover axle strap, but I don't know which model - anyone help
> ??
>
> http://www.geocities.com/iggypop37/101_0062-1.jpg
>
> cheers

It's part of the axle strap off the rear of any Landrover from Series 1 to
Series 3. Can't tell which one as part has been cut off.
Very poor job - the Landrover installation has the strap held by a plate
clamped with two bolts, and does not rely on the hole to withstand load.
Also the Landrover installation is looped round the axle.
JD

 

ormus

New Member

Posts

3,200

Location

M6

• Mar 27, 2006

• #5

looks like a series 11a to me. hard to tell as its been butchered.

 

I

[email protected]

Guest

• Mar 27, 2006

• #6

granted - but it won't get the hammering that it gets on a landy - it
is just to hold shortened springs in place when jacking up the car (or
occasional high speed take-offs)

JD wrote:
> [email protected] wrote:
>
> > the axle strap shown below fitted to a modifed skoda rapid. I know it
> > is a landrover axle strap, but I don't know which model - anyone help
> > ??
> >
> > http://www.geocities.com/iggypop37/101_0062-1.jpg
> >
> > cheers
>
> It's part of the axle strap off the rear of any Landrover from Series 1 to
> Series 3. Can't tell which one as part has been cut off.
> Very poor job - the Landrover installation has the strap held by a plate
> clamped with two bolts, and does not rely on the hole to withstand load.
> Also the Landrover installation is looped round the axle.
> JD

 

B

beamendsltd

Guest

• Mar 28, 2006

• #7

In message <[email protected]>
[email protected] wrote:

> the axle strap shown below fitted to a modifed skoda rapid. I know it
> is a landrover axle strap, but I don't know which model - anyone help
> ??
>
> http://www.geocities.com/iggypop37/101_0062-1.jpg
>
> cheers
>

How long is it? Buy the look of it it's been cut down so either
237100 SWB Check Strap 88in RH
274469 SWB Check Strap LH
598854 LWB Check Strap

will probably do the job.

Richard
--
www.beamends-lrspares.co.uk [email protected]
Running a business in a Microsoft free environment - it can be done
Powered by Risc-OS - you won't get a virus from us!!
Boycott the Yorkshire Dales - No Play, No Pay