I'm wondering if anyone has a CAD model of a Series chassis? Or perhaps an original engineering drawing that I could build a CAD model from? Wanting to explore the behaviour of various modifications, and would prefer not to have to start from scratch if I can help it! Thanks.
CAD model of chassis?
- Thread starter skwdenyer
- Start date
This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
steve2286w
Well-Known Member
- Posts
- 4,053
- Location
- monkeyangerland
The original chassis drawings with dimensions are in the series 3 workshop manual
Thank you. The dimensions in the workshop manual are only those for checking the trueness of the chassis, rather than a complete set for fabricating (or, in my case, modelling) the chassis.
Obviously if I can’t get a hold of what I seek then I can 3D scan a complete chassis if needs be
steve2286w
Well-Known Member
- Posts
- 4,053
- Location
- monkeyangerland
Could you ask a chassis supplier to buy a set 
steve2286w
Well-Known Member
- Posts
- 4,053
- Location
- monkeyangerland
Scan the image into cad, scale up to major dimension , digitise and use workshop manual dimensions to create main structure and supplement with tape measure 
jobs a goodun
jobs a goodun
- Posts
- 9,031
- Location
- A bit sarf of Dorking
I tried that. Not fair to name them, but they'd obviously never made anything using it.Could you ask a chassis supplier to buy a set
steve2286w
Well-Known Member
- Posts
- 4,053
- Location
- monkeyangerland
Had a few glaring oddities I assume 
