cab lights...

Anyone here stuck a cab light in their series at all? Anyone rigged it up to the door opening? How would one do this?
Cheers guys.

what i did was wire in a multi cigarette lighter switch, and bought a light that plugs into the ciagarette lighter, put the light in the ceiling with some brakets and the cigarette lighter has a seperate switch module so you can control what sockets are on and off, look in halfords thats where i got my stuff, they have a huge section of lighter sockets and accesories.

Get one of those flouresant (sp) strip lights in a Caravan shop, usualy 1 or 2 tubes about 12" long, these have a switch in them, hard wire em to car and use the switch, they are bright as well....

yeah thats what i did bu tpwered it through a cigarette lighter socket

Cheers brnocz for the PM. What type of switch is it youve used though? Just a small lever microswitch or a foot type switch?
Cheers.

If you want to hard wire it something like this?
Mercedes Sprinter Front/Side Load Door Contact Switch on eBay, also Van Pickup Parts, Vans Pickups, Commercial Vehicles, Cars, Parts Vehicles (end time 14-Feb-09 09:25:21 GMT)

or even cheaper!
UNIVERSAL CUT 2SIZE CAR ALARM DOOR BOOT COURTESY SWITCH on eBay, also Car Alarms Immobilisers, Security Electrical, Car Accessories, Cars, Parts Vehicles (end time 03-Feb-09 18:18:00 GMT)

reply to question on what type of switch, i took mine off an old vauxhall which was a push button,a proper door switch and ive never had any probs with it,

I fitted the Mercedes Spinter lights in my cab. Although I fitted 2, one would have been more than enough. I would suggest getting a cab light which has a switch built into it and a bit of wiring loom - makes things a lot easier I couldn't be bothered using a door switch though.

i have a generic lamp in my roof, it runs off a switch on the dash whick is much more useful than one on door switches