Bulkhead- Sorting

Landrover77 · May 26, 2020

Just had my Bulkhead back from Galvanisers - Slight warp on area near gearbox tunnel.
Any Top Tips for getting prepped for Painting with Paintman Coach enamel.
What Seam Sealer do i need
have been recommended a T Wash First then Prime & Paint.
many thanks

Blackburn · May 26, 2020

Need etch primer as well as T wash.

Landrover77 · May 26, 2020

Hi Blackburn, thanks for that.
Would I Do things in this order?
T Wash
Dry completely
Seam seal joins
Etch prime
Primer
Top coat

many thanks

Shippers · May 26, 2020

I would after T-wash...
Etch prime..
Prime..
Seam seal..
Top coat...

Landrover77 · May 27, 2020

Thank shippers, any reccomened seam sealer brands?

Shippers · May 27, 2020

Landrover77 said:
Thank shippers, any reccomened seam sealer brands?

Have used U-pol in the past...the reason I would apply it last before top coat is to give the metal underneath more protection...

Landrover77 · Jul 8, 2020

All Drilled out & Threads Tapped,
Bit of sunshine needed next for Etch primer

WoodyO · Jul 9, 2020

Can I ask how much you paid to have it galvanised? Its something I'm considering once I've repaired it.

resto_d1 · Jul 9, 2020

Agree with shippers. Have a look at bilt hamber seam sealer. I use a pu sealant called puraflex on my welding. It’s for sealing up water tanks etc.

Landrover77 · Jul 9, 2020

Galvanising was 250,

Bulkhead- Sorting

Landrover77

Member

Blackburn

Well-Known Member

Landrover77

Member

Shippers

Well-Known Member

Landrover77

Member

Shippers

Well-Known Member

Landrover77

Member

WoodyO

Well-Known Member

resto_d1

Well-Known Member

Landrover77

Member

Similar threads