Series 2 Broke the rear diff in 5 door 109

The series 3 LWB back axle and prop shaft should just fit. That's a Salisbury.
You can get weld in replacement pans for the diff, but am alternate is to get a weld in pipe end from a commercial steel pipe supplier. Usually cheaper, and made from thicker stuff. They're available in the right size and might be a more locally available option, compared to the UK suppliers.

Through my LR club I have been in touch with a fellow on Vancouver Island who says he has a couple if diffs. Just waiting for him to give me a price.
Turns out my recently purchased P38 also has a diff problem. Noticeable vibration when driving and when we drained the oil 2 bolt heads drop out, the ones holding the ring gear in place, so it might be loose. Going to swap in a diff from an axle I bought as a spare for my offroader. Should be a good car after that. 386k km but runs great and engine is strong. Body and interior very nice. I was planning to sell it after repairs but not sure now.

Good news. Be sure they're series, not range rover.

I had similar with a ring gear coming loose. I was lucky there was no damage to the gear so it went back on with new bolts.

Here are some photos. A bit more of a problem than the ring gear coming loose <g>.[A

Well fubared that one, looks as if the carrier just gave up. Although a common initial fail is the cross pin snapping.

Yep, nothing salvageable there. Next week I will be picking one up from a club member for $250CAD. Took out the diff from my 2nd P38 yesterday and 6 bolt heads were broken off the bolts that hold the ring gear in place. Must have put the gear out of balance and caused the vibration. I will post a photo in the "What did you do with your Land Rover today" section.

Update on the 109. I did pick up the replacement diff although delayed a few days by unusually heavy snowfall. Brother installed by himself and all is well except for bent rear cross member.

Result! Thanks for the update, a good local fabricator should be able to fix the crossmember.

Good to hear it is sorted.

Gord Wedman said:

Update on the 109. I did pick up the replacement diff although delayed a few days by unusually heavy snowfall. Brother installed by himself and all is well except for bent rear cross member.

Click to expand...

Did he have a mechanic help him? Those things are weighty beasts aren't they?

Randometer said:

Did he have a mechanic help him? Those things are weighty beasts aren't they?

Click to expand...

No, he did it himself.
He goes to the gym every second day to work out and was an amateur body builder at one time. At 67 he is quite strong and considers this sort of thing to be a worthy challenge. Note that we are both wee folk at 5.5 feet/1.7 m and less than 135 pounds/61kg.

Gosh! That's even less than me!