Brake lights stuck on Disco 2 (04)

This site contains affiliate links for which LandyZone may be compensated if you make a purchase.
barndoor

barndoor

Member
Posts
90
Location
Stoke on Trent
Hi all
trying to figure out why my brake lights are permently on.
I figure the stop switch is either stuck or broken but I can't find it!
Where I think it should be...on the bracket in front of the pedal...there is just an empty fixing hole.
The picture in the haynes manual ia a little confusing any help would be most appreciated...thanks
 
thanks for that.
Have located and removed switch and lubricated it but it has made no difference.
Switch is working but when in postion brake pedal is not pushing it back enough to break contact.
So either brake pedal has dropped a fraction or switch is not dropping enough must say that there is a little play in switch which might be the reason its just not dropping enough.
 
well it was the switch...for future ref for anyone with the same problem the plunger needs to be over an inch in length not a quarter inch like mine was even though it still worked when depressed...cheap repair £8...happy days
 
You must log in or register to reply here.

Similar threads

J
Disco 3 Park Brake
Replies
1
Views
288
Coca_SnK
C
C
Arghh Gear selector stuck
Replies
7
Views
1K
Chrislowns
C
E
Stuck removing brake light switch
Replies
3
Views
360
ellieb99
E
D
Disco 2 temperamental interior lights.
Replies
6
Views
676
Stanleysteamer
Stanleysteamer
L
Disco 2 brake question
Replies
5
Views
1K
landynutterme
L
Back
Top