Bonnet Pull

Firstly sorry for filling up the forum with Qs! New Landy, full of issues and its my daily driver! I really appreciate all the help though!

At present my bonnet pull consists of a looped wire hanging out of grill. (Well done previous owner)

I want to fix this! I own a 1994 110 and the pic in the manual shows it should be by my left knee. However there is nowhere to attach a pull here.

At some point my Landy has had a new td5 bulkhead. Does this mean it will have to be relocated?

Thanks,

Wes

You could probably buy the bracket which is little more than a piece of flimsy folded metal and a nut. If not just make one

Changed mine the other day, you could knock one up no problem

As said above its only a little bracket

My point is that there are no holes to bolt the bracket to in the bulkhead. Can I get on the back to nut and bolt it?

Just use rivets or for a bit of strength rivnuts. Is there no bracket in place for the td5 one?

I'd go for a td5 bonnet opener. The td5 bulkhead i think has thumb screws, which the td5 bonnet opener attaches to. I bought a bonnet opener for td5 same time i got my td5 bulkhead...haven't fitted bulkhead yet though so not experimented!

The pull bracket & lever come as one and is not expensive to buy new, I fitted the later one to my ex-MOD 90 which originally used the grill lever.
If you don't have the two studs on your bulkhead then either use Rivnuts or nut & bolt it, neither is a problem.

Perfect thanks guys!

I love a good pull.