Bolt sizes for rebuilding chassis

Found this when looking for bolt sizes and thought it would be useful


Qty Size Pitch Length/Type Location
2 M14 2.0 80mm Panhard Rod
2 M14 2.0 Locknut Panhard Rod
4 M16 2.0 100mm Front Radius Arm to Axle
4 M16 2.0 Locknut Front Radius Arm to Axle
2 M20 2.5 Nylock Front Radius Arm to Frame
2 M20 - Washer Front Radius Arm to Frame
2 M20 - Dished Washer Front Radius Arm to Frame
2 M20 2.5 Nylock Rear Link to Frame
2 M20 - Washer Rear Link to Frame
2 5/8 11 4in Rear Link to Axle
2 5/8 11 Nyloc Rear Link to Axle
6 M10 1.5 30mm Rear Link Bushing Plate
6 M10 1.5 Nylock Rear Link Bushing Plate
8 5/16 24 nuts Shock Towers
8 5/16 - lock washer Shock Towers
2 5/16 24 1in Rear Link Balljoint
2 5/16 - lock washer Rear Link Balljoint
4 M10 1.5 35mm Front Rollbar
4 M10 - Washer Front Rollbar
4 M10 1.5 Nyloc Front Rollbar
4 M10 1.5 35mm Rear Rollbar
4 M10 - Washer Rear Rollbar
4 M10 1.5 Nyloc Rear Rollbar
2 3/4 16 4in Top Link
2 3/4 16 Nyloc Top Link
4 M10 1.5 35mm Front Shock Mount
4 M10 - Washer Front Shock Mount
4 M10 1.5 Nyloc Front Shock Mount
6 M10 1.5 110mm Rear Upper Shock Mount
6 M10 - Washer Rear Upper Shock Mount
6 M10 1.5 Nyloc Rear Upper Shock Mount
8 M12 1.75 Front and Rear Sway Bar Mounts
8 M12 1.75 Nyloc Front and Rear Sway Bar Mounts

20 M10 1.5 40mm Axle Flanges

6 M8 30mm Water Pump

16 3/8 24 Nylock Propshaft (front and rear) ends
8 3/8 24 1.25in Propshaft (front and rear) diff end
4 3/8 24 1.25in Propshaft (front) transfer case end

20 M10 1.5 Nut Differentials

Engine
6 7/16 14 96mm Cylinder Head
14 7/16 14 66mm Cylinder Head

8 3/8 UNC 2.79in Rocker Shaft Pedestals
2 M4 0.7 14mm Stepper Motor (IAC)
2 M4 0.7 Potentiometer

3 1/4 UNC 1in Plenum Water Jacket
1 1/4 UNC 1-3/8in Plenum Water Jacket

1 M8 80mm Plenum Chamber
5 M8 55mm Plenum Chamber
6 M8 - washer Plenum Chamber

1 7/16 UNC 1-1/8in camshaft

2 5/16 UNC 3/4in camshaft retaining plate

5 5/16 UNC 3-1/8in Front Cover
1 5/16 UNC 3-7/8in Front Cover
3 5/16 UNC 4-3/4in Front Cover
9 5/16 - washer Front Cover

8 1/4 - lock washer Valve Cover Bolts
8 1/4 - washer Valve Cover Bolts
4 1/4 20 1-5/16in Valve Cover Bolts
4 1/4 20 7/8in Valve Cover Bolts

6 M8 1.25 40mm Exhaust flanges
6 M8 1.25 Prevailing Torque Locknut
M8 12mm Crankshaft Pully

16 3/8 16 1" or 2"? Exhaust Manifold to Heads

2 M4 15mm TPS

Use grade 10.9 for all metric
Use grade 8 for all SAE __________________

Fantastic. Thanks for that.

Really good list. Same for 90 and 110?

timc1967 said:

Really good list. Same for 90 and 110?

Click to expand...

Would have thought so, suspension parts the same and body bolts just more on a 110